Binary firmware for a VS T56RJ universal LCD controller board, set up for a 1920x1080 Full HD panel. Technicians flash such an image onto the mainboard SPI chip to revive a dead board or to change the output resolution to suit the panel being driven. The panel timing in this dump only suits Full HD screens, so check the panel specification before use. Read and save the existing flash first, write with a CH341A-type programmer, verify, then check the LVDS mapping on the first power-up.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @jdbios_world. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @jdbios_world | 18 Jan 2018 | Open file on RM Schematics |
| @led_software | 28 Oct 2021 | Open file on RM Schematics |
| @bios_bin_file | 13 Jan 2023 | Open file on RM Schematics |
| @tvsoftwareworld | 6 Oct 2026 | Open file on RM Schematics |
| @tvsoftwareworld | 6 Oct 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →