Firmware image for the W2052TQ monitor, W2x52TQ series, tied by name to board or part S8-15808 and a TSUMO58 scaler, version V190 with code 000A, dated 080331 and marked master. At 256 KB it suits a 2 Mbit SPI flash. Use a programmer to restore the scaler software when the screen shows nothing or the OSD fails. Check the board marking and the scaler chip against TSUMO58, since other W2052TQ versions use an MST controller, and save the original first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →