Early firmware release V100 for the W2053S monitor, checksum 0F58, with a 090116 date code, the oldest build in this set. The 224 KB binary is a scaler flash image used to revive a display that powers up without picture or reacts strangely to its buttons after firmware corruption. Since the name does not state the scaler type, check the controller marking and board before programming, keep a backup of the current flash contents, and prefer a later revision if one matches your board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →