Firmware dump for the W2053S LCD monitor using an MST scaler, labeled version V133 with checksum 742F and a date of 2009-04-13. Sized at 224 KB, it is intended for reflashing the scaler serial flash with a programmer when the stored code is damaged and the unit shows no picture, wrong colours or an unresponsive OSD. Earlier builds like this one are useful when a newer version misbehaves; still confirm board identity, back up the chip, and verify the checksum after the write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Jun 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 9 Aug 2019 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 8 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →