Monitor firmware for the W2086T, version V120 with code 10E2, dated 20090908 and tagged EPA, a label whose exact meaning the name does not explain. The file is 224 KB, smaller than a full 2 Mbit flash, so it may not fill the whole chip and the programmer should be set to the right chip type and start address. Images like this restore the scaler program on a display board when the monitor shows no picture. Verify the board model and back up the original contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Jun 2017 | Open file on RM Schematics |
| @biosarchive | 28 Jun 2017 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →