Firmware binary for the W2242S monitor, W2x42S family, labelled U and built for a TSUMU18ER scaler, version V100 with code A173 and date 080915. At 256 KB it fits a 2 Mbit SPI flash on the main board. Use it with an SPI programmer to restore a display stuck in standby, boot looping or showing no picture. Check that the scaler marking on the board is TSUMU18ER, since other W2242S boards may use different controllers, and save the original flash contents first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →