Scaler firmware image for the W2252S display from the W2x52S range, version V200 with identifier 8746, built on 081110 and marked MP. It is a 256 KB raw binary, matching a 2 Mbit serial flash chip on the monitor control board. Use a programmer to write it when the monitor powers up without a picture or the on-screen menu misbehaves. Several firmware versions exist for this model, so compare the main board number, keep the original dump and test that the panel resolution is correct.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →