Scaler firmware for the W2253TQ monitor, marked version V150 with a 090325 date code and checksum 72DB. The 224 KB binary is meant for the SPI flash beside the scaler on the main board and is an earlier release than the V153 build of the same model. Repairers write such images with a USB programmer and clip when corrupted firmware causes blank screens, wrong logo or unresponsive keys. Always read and archive the original chip before erasing, and verify the checksum after programming to confirm a clean write."}
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Feb 2017 | Open file on RM Schematics |
| @biosarchive | 28 Jun 2017 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →