Monitor firmware image for the W2253TQ model, version V153, dated 090912, with checksum 6BC4 noted in the file name. At 224 KB it is a scaler flash dump intended for the small SPI memory on the monitor main board. A newer revision than the V150 build of the same model, it can be used to recover a monitor stuck on no image, a frozen menu or a dead power button. Back up the existing chip contents with a programmer before writing, and check that the board inside your unit matches this model."}
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Feb 2017 | Open file on RM Schematics |
| @biosarchive | 28 Jun 2017 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →