256 KB scaler firmware for the W2253V monitor, likely an LG Flatron model, carrying version 1.69 and a date code of 090511. The image fits a 2 Mbit SPI flash and is programmed with an external tool or a dedicated ISP cable when the display stays black, cycles power or loses its OSD. Check that the main board version matches the model and that the flash size equals 256 KB, and read and save the original chip before writing so it can be restored.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Feb 2017 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →