Firmware for a W2452T monitor, taken from the chip labelled IC601 on the main board, version V1.10, with checksum CDA4 and date 080219. The image is 512 KB, so the target SPI flash must be 4 Mbit; a smaller chip will not accept it. Technicians use such dumps to restore a monitor whose scaler firmware is damaged, showing symptoms like no backlight, endless reboot or garbled OSD. Desolder or clip IC601, save its current contents with a programmer, then write and verify this file."}
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →