Firmware image of 16 MB saved from a Winbond W25Q128 SPI flash, named only by the chip and the date and time of the read in December 2018. The name gives no device, brand or motherboard number. Programmer software such as those used with CH341A or RT809 adapters typically names dumps this way. Open it in a hex editor or a UEFI tool to look for model strings before trusting it. Read and save the original chip first, and flash only a board whose markings match the source.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →