16 MB binary named only after the Winbond W25Q128FV flash chip, with no laptop model or board number. It is most likely a full read of a 128 Mbit SPI chip, but its origin cannot be determined from the name. A hex editor or UEFITool can reveal vendor strings or the BIOS version inside. Do not write it to a board unless you have confirmed it matches that exact motherboard. Always back up the existing chip contents before any programming attempt.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →