Firmware dump of 2 MB labelled with the chip name W25Q16, a Winbond 16 Mbit SPI flash, matching the file size; the name carries no model or board information. Dumps like this are typically full reads made with a CH341A, RT809 or similar programmer and contain the BIOS of whichever board the chip sat on. Because the source device is unknown, treat it as unverified. Before writing, read and archive the target chip, verify it is a 2 MB part, and confirm the motherboard number matches the board the image was originally taken from.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →