Monitor scaler firmware, 256 KB raw binary, for the W2x52V series, built for a TSUMU58CWDJ scaler controller, version 150 with checksum-like code 32A2, dated 080619 and marked master. The 256 KB size matches a 2 Mbit SPI flash typical of monitor main boards. It is written with a programmer to recover a display that shows no image, freezes or has a corrupted OSD. Confirm that the scaler chip marking matches TSUMU58 and read the original flash before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →