Firmware dump for an X.Vision XL1920AI monitor, 128 KB in size, which fits a 1 Mbit serial flash on the monitor control board. Beyond the brand and model the name gives no controller, chip or version details. Technicians use such a file to repair monitors that do not power on, flicker the LED or lose the OSD after corrupted firmware. Identify the flash chip on the board, check its capacity matches the file, save the current contents, then write and verify with a programmer."}
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Apr 2017 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →