Clean ME firmware image of 16 MB labelled with the XM25QH128A flash chip, a 128 Mbit SPI part from XMC. The name says nothing about the laptop or motherboard, so the source board must be established before flashing. Such dumps are written with a programmer to fix boot failures caused by a damaged ME region. Back up the existing chip first, confirm the board model matches, and make sure the 16 MB image equals the capacity of the chip fitted.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @vinafix_bios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →