Firmware dump for an XVISION XL1910AI monitor, a 19-inch-class display, marked ok in the name, meaning the uploader reports it as working. At 47.5 KB it is a small image typical of the scaler board's serial EEPROM or SPI flash. It is used to cure a dead or blank screen, a missing OSD or a power-on loop caused by corrupted firmware. Match the scaler chip and board before writing, and read out the original memory with your programmer first so you can restore it if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 19 Jan 2019 | Open file on RM Schematics |
| @biosarchive | 23 Feb 2019 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →