ASRock H110M-DVS revision 3.0 BIOS image, noted as clean and tested working. A clean dump has board-specific information removed, making it suitable for replacement chips or recovering a board that fails to start after a bad flash. Write it with an SPI programmer such as a CH341A after confirming the revision printed on the PCB reads 3.0. Save the original chip contents beforehand and verify that the image size matches the flash chip, so the write and verification pass without errors.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ZINFOSERVICECHANNEL1. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @ZINFOSERVICECHANNEL1 | 21 Jun 2025 | Open file on RM Schematics |
| @zinfoservicebios | 21 Jun 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →