Firmware dump for the ASRock H510M-HDV/M.2 motherboard, with the Intel CSME region cleaned and the file reported as tested OK. The name puts the M.2 variant explicitly, so check the exact model on the board label before flashing. Programmers such as the CH341A write the image to the BIOS SPI chip when a board fails to POST or shows ME-related faults. Read and save the original chip contents first, and make sure the image size matches the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ZINFOSERVICECHANNEL1. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @ZINFOSERVICECHANNEL1 | 2 Jan 2026 | Open file on RM Schematics |
| @zinfoservicebios | 2 Jan 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →