BIOS for the ASRock X99M Killer motherboard, board revision 1.02, marked as tested and working. Use it to reprogram the SPI flash chip with a programmer when the board shows no POST or a corrupted firmware after an interrupted update. The PCB revision should be checked against 1.02 before flashing. As with any dump, read the existing chip and store that copy first, and make sure the extracted image matches the chip capacity, since an oversized or undersized file will not program correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ZINFOSERVICECHANNEL1. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @ZINFOSERVICECHANNEL1 | 21 Jun 2025 | Open file on RM Schematics |
| @zinfoservicebios | 21 Jun 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →