Clean BIOS image for the Gigabyte H410M S2 V2 desktop motherboard, revision 1.0, listed for a 10th generation Intel Core i3 setup and sized for a 32 MB flash. The clean label indicates a dump with personal data such as serials or the ME state reset, suitable for reflashing a board that fails to post. Write it with an SPI programmer after saving the original chip, then re-enter the MAC address and serial if needed. Confirm the board revision on the PCB matches 1.0 before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ZINFOSERVICECHANNEL1. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @ZINFOSERVICECHANNEL1 | 2 Sept 2025 | Open file on RM Schematics |
| @zinfoservicebios | 2 Sept 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →