Firmware set for the HP 200 G3 all-in-one on Quanta mainboard DAN97RMB6D0, revision D, marked clean and tested OK. Quanta DA-series numbers encode the project and revision, so the full code printed on the PCB should be checked before flashing. In this kind of package, clean usually means the Management Engine has been reset for a new installation. Technicians use the dump to restore a board whose SPI flash is corrupted. Save the original chip contents first, then program the image with a suitable external programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @zinfoservicebios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @zinfoservicebios | 4 Jul 2025 | Open file on RM Schematics |
| @ZINFOSERVICECHANNEL1 | 4 Jul 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →