BIOS dump for the HP EliteOne 800 G2 all-in-one touch model, built on Inventec board 6050A2716501, revision A01. The name marks it as clean, which usually means a reset ME region with no previous owner data. Inventec 6050A numbers identify the PCB assembly, so match the label on the board. The 7.2 MB RAR should be extracted and its image compared with the flash chip size. Then write it with an SPI programmer to recover a dead or looping unit, after backing up the existing contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @zinfoservicebios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @zinfoservicebios | 4 Jul 2025 | Open file on RM Schematics |
| @ZINFOSERVICECHANNEL1 | 4 Jul 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →