Raw 8 MB binary image whose name, z8v x16, says little; z8v may refer to a board model but the name does not confirm brand or device. The 8 MB size corresponds to a 64 Mbit SPI flash chip, the usual target for a direct dump. Such a file is written with a hardware programmer like a CH341A or RT809 when a board shows no POST. Identify the board and chip independently first, back up the existing contents, and only write it to a matching 8 MB chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →