Version 3.95 firmware for the ZA-7100 Extreme New satellite receiver, roughly 3.1 MB, with a build date in the name. It is meant to update or restore the receiver software, normally through USB or a serial loader. Files for neighbouring models of the same series look alike, so verify the label on the unit and the main board before loading. A wrong image can leave the receiver dead, and recovery may then need a programmer on the flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →