ZA-7200-EXTREME-NEW V3.95 26102026 @MediaStarSupportS@satDL

BIOS .bin 3.13 MB Shared

Software file for the ZA-7200 Extreme New satellite receiver, version 3.95, dated in the name, about 3.1 MB in size. A file of this size is typically an update loaded through USB or a loader tool rather than a full flash dump, though the receiver manual or service tool should confirm the method. Check the exact model and hardware version printed on the board before loading, because similar receivers often use different main chips and firmware is not interchangeable.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files