BIOS dump for Compal board LA-B441P, project ZAZ00, revision 1.0 (A00), dated 2014-10-20, labelled as working and fully tested. The name gives no laptop brand, but the board number identifies the PCB. Write it to the SPI flash with an external programmer to recover a dead or bricked board. Save the original chip contents before programming, confirm LA-B441P and the revision on the PCB, and check that the image matches the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (8)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 10 Sept 2023 | Open file on RM Schematics |
| @Laptopbiossolutions | 19 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Nov 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →