BIOS image for a Zebronics G31 desktop motherboard, identified by the code ZEBYUG31409185437, and marked both OK and confirmed. The 1 MB binary suits an 8 Mbit SPI flash chip commonly used on G31 boards. Technicians flash such dumps with a programmer when a board shows no display or fails to POST because of corrupted firmware. Check that the code on your board or original BIOS label matches, verify the chip capacity, and keep a backup of the existing contents before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @freeschematicdiagram. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →