Firmware image for the Compal board LA-B181P revision 1.0, dated 2014-04-25, covering the ZPL40, ZPL50 and ZPL70 project codes and stored as a 4.06 MB RAR. The name gives no brand, though this Compal board family is found in HP ProBook 4x0 G2 laptops. Technicians write such a dump to the SPI flash with a programmer like a CH341A when a board fails to boot. Read and preserve the original chip before erasing, check LA-B181P on the PCB, and make sure the image size equals the flash chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Jan 2022 | Open file on RM Schematics |
| @pepeelectronica | 28 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 3 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →