Production firmware region image, version 2.0.5.3105, 1.375 MB, according to the PRD and RGN tags that follow Intel Management Engine naming habits. Beyond the version number the name says nothing about the hardware, so the target board is unknown. Such region files are used to restore the ME portion of an SPI flash, often with a hardware programmer or a flash utility. Make a complete backup of the chip before any write and verify that the descriptor allots a region of matching size, otherwise the image will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →