Firmware binary labelled version 2.1.5.3105, size 1.375 MB, with the PRD and EXTR tags. These tags follow the convention seen in Intel Management Engine firmware collections: PRD denotes a production build and EXTR an extracted image rather than a stock region file. No device, board or chipset is named, so its suitability must be confirmed from the platform's ME generation. Before writing anything to an SPI flash with a programmer, read and keep the original contents, and confirm the ME region size in the flash descriptor fits this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptexdna. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @laptexdna | 30 Sept 2020 | Open file on RM Schematics |
| @one5technology | 25 Nov 2020 | Open file on RM Schematics |
| @one5technology | 26 Nov 2020 | Open file on RM Schematics |
| @generalschematics | 15 Sept 2024 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →