Innolux BT156GW01 LCD panel at revision V3, stored as a 256-byte EDID binary; the 24_02 prefix and size both match a 24C02 serial EEPROM. This table carries the manufacturer code, model, timings and preferred resolution the laptop reads from the panel at power-on. Technicians flash it to recover screens that went black or show a wrong resolution after their EEPROM was wiped. Check that the panel sticker shows BT156GW01 V3, save the current chip contents first, and write the file with a CH341A or similar programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @one5technology | 10 Nov 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →