BIOS image for the HP EliteBook 840 G5 built on Inventec board 6050A2945601, sized at 32.0 MB for a 256 Mbit SPI flash. The name marks it as a fixed fast-display version with the Management Engine region cleared, and the uploader flags it as working. An ME-cleared image is used when a corrupted ME causes slow or no display or long boot delays. Make sure the flash chip on your board is really 32 MB, since a mismatched image will not fit. Back up the original contents with a programmer before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @nityatechnology2020. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →