HP EliteBook 840 G5 BIOS image for the Inventec board 6050A2945601-MB-A01, with the Intel Management Engine region cleaned, and marked working. A clean ME region lets the firmware rebuild its configuration, which often solves boot loops or a 30-minute shutdown after a chip swap. The 32 MB raw binary needs a 32 MB SPI chip. Inventec's 6050A numbering identifies the board; save the original chip contents with a programmer before writing this dump.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →