AFS Haier x3-15BFR1-011000 UT40II1 REV 1.0

BIOS .bin 8.00 MB Shared

BIOS dump for a Haier X3 laptop on mainboard 15BFR1-011000 marked UT40II1 revision 1.0, supplied as an 8 MB binary and tagged with Clevo as brand. It is meant for programming directly into the SPI flash when the notebook powers on without display or fails after a bad update. Before writing with a hardware programmer, match the board number and revision silkscreened on the PCB, confirm the chip is 8 MB, and back up the original contents, since serial and MAC data may differ between units.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files