256-byte dump tied to a Hitachi TX39D99VC1FAA display panel, most probably its EDID EEPROM contents. Data of this size describes panel identification and timing so the controller can drive the screen. It is useful when the panel EEPROM is corrupted and the display shows nothing or uses wrong settings. Program it with an I2C EEPROM programmer to the matching chip, verify the panel part number on its label first, and keep a copy of the original read for safe recovery.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →