EDID dump for a Hitachi LCD panel identified by the code TX39D99VC1FAA, stored as a 256-byte binary image. At this size the file matches the contents of the small serial EEPROM inside an LCD panel that reports resolution, timings and vendor data to the graphics controller. Technicians write such an image back with an EEPROM programmer when a panel shows no picture, a wrong resolution or is not detected. Read and save the existing chip contents first, and confirm the panel part number on the label matches before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →