BIOS image for the ASRock H110M-DVS motherboard, revision 3.0, modified per the name for Xeon E3 v5 processor support. The 8 MB raw binary matches a 64 Mbit SPI flash chip. Such modified firmware lets Skylake Xeons run on this H110 board. Write it with an external programmer such as a CH341A, saving the original chip first to preserve the MAC address. Verify that the PCB reads R3.0 and that the flash chip is 8 MB before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_xeon_e3v5. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →