256-byte EDID dump for the Chi Mei N173FGE-L21 laptop display; the name gives no revision. This model is a close sibling of the L23 variant, so be careful not to mix them up. The binary stores the panel's manufacturer ID, product code and supported timings, which the GPU reads to configure the output. It is used to fix black screens or wrong resolutions caused by a corrupted descriptor. Check the sticker on the panel, decode the file and verify its checksum, and back up the original data before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →