A Chi Mei N173FGE-L23 panel EDID saved as a 256-byte binary, with no revision stated. The N173 prefix in Chi Mei naming usually points to a 17.3-inch class LCD. Small dumps like this hold the display descriptor the notebook reads at startup to set resolution and timings. Technicians write it back when a panel's EEPROM is corrupted, leading to no picture or incorrect display detection. An EDID editor will show the decoded fields and checksum; confirm the panel model sticker matches and back up the original before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →