Panel EDID for a Chi Mei N173FGE-L23, with C2 in the name that likely denotes revision C2. The file is 256 bytes and contains the descriptor the panel reports for resolution, timing and vendor identity. It serves as a reference or restore image when the panel's own memory has been erased or damaged. Before writing it, open the binary in an EDID decoder, compare it against the similar Rev C2 dump of the same model, check the panel label, and read out and save what is currently stored on the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →