EDID data for the Chi Mei N173FGE-L23 LCD panel at revision C2, in a 256-byte file. Rather than motherboard BIOS, it is the identification block a laptop panel exposes to the graphics controller over the display data channel. It describes the native mode, timings and manufacturer codes. A common repair use is reprogramming a panel that stays black or is listed as a generic monitor. Decode it first to confirm a valid checksum, make sure the revision printed on the panel agrees, and keep a backup of the current EEPROM contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →