Firmware dump for a G45M03 motherboard, revision A00, taken from the chip at location U21 with a stated capacity of 1 MB. The archive is about 1002 KB, consistent with a single 1 MB image. The U21 reference helps locate the flash device on the PCB before desoldering or clipping onto it. Program it with a standard SPI programmer after verifying the chip ID and capacity match, and read out and keep the existing contents first in case the replacement image does not boot.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Feb 2024 | Open file on RM Schematics |
| @generalbios | 3 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →