Firmware for a G45M03 board at revision A03, compressed as a small RAR archive of roughly 535 KB, with no device brand or tested status stated. Because revision A00 of the same board also exists, make sure the PCB revision matches A03 before flashing. The typical use is reprogramming the SPI BIOS chip with a programmer when the board shows no display or fails to boot. Back up the original chip before writing, and check that the extracted image size exactly matches the flash chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Feb 2024 | Open file on RM Schematics |
| @generalbios | 3 Feb 2024 | Open file on RM Schematics |
| @generalbios | 4 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →