Firmware dump for the Haier LE32B3000D television built on an MS33931-ZC01-01 board, with an MX25L3206E listed as the source chip. The file is a 4.00 MB raw binary sized for that 32 Mbit Macronix memory. It is meant for reflashing the mainboard when the set does not start, loops at the logo or shows corrupted menus. Make sure the board number matches, read the current chip and keep the copy, then write the image with an SPI programmer and verify it before testing the set.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →