Firmware dump for the HP ProBook 440 G0, tied to board number 12238-1, which follows the Wistron numbering pattern, so Wistron is the ODM behind this mainboard. The name carries an ok mark, suggesting the dump was tested on a working unit. The RAR archive of 3.59 MB should hold the image for the SPI flash. Before programming, check that 12238-1 is printed on your PCB, back up the existing chip contents, and verify that the image size equals the capacity of the installed flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (10)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 5 Dec 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 23 Dec 2020 | Open file on RM Schematics |
| @biositechyangiyer | 1 Feb 2021 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →