BIOS image for the HP EliteBook 840 G3, motherboard 6050A2854301-MB-A01, for an MX25L6473 flash chip, a 64 Mbit Macronix part. The 4.17 MB RAR is used to restore firmware on a board that is dead or stuck after a failed update by programming the SPI flash directly. The 6050A prefix follows the Inventec numbering used for many HP boards. Back up the original chip first, since HP stores serial and configuration data in it, and verify that the image size matches the 8 MB capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 2 Jun 2021 | Open file on RM Schematics |
| @generalbios | 8 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →