256 KB binary for an HP G62 with Mainboard B53SE and part number 01013Y000. The small size fits a keyboard or embedded controller chip rather than the main BIOS, and a 4 MB file with the same name covers the main flash. Write it with a programmer that supports the controller chip, after reading a backup. Check that the board code and part number printed on the PCB agree with the name, and that the target chip is also 256 KB, before relying on this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 5 Feb 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 10 Jul 2019 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →