Main BIOS dump of 4.00 MB for the HP G62 with B53SE motherboard, part number 01013Y000, as given in the name. A separate 256 KB file with the same name holds the smaller controller firmware. Technicians program this image into the 4 MB SPI flash to revive a board that will not post or was bricked by a failed update. Verify the PCB code and part number, confirm the chip is 32 Mbit, and keep a copy of the original contents before erasing and writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →